Walk-In Chambers
Biora Portable Walk-In Chamber Configurations
Aura-FX Digital Gas monitoring is an essential aspect of maintaining a life-supporting atmosphere within the refuge chamber. During entrapment, occupants consume oxygen and expire carbon dioxide (CO2) and carbon monoxide (CO) as part of their normal respiration. CO can also enter the chamber during occupant entry and if the compressed air intake is compromised.
Closely monitoring gas levels in the chamber allows occupants to take corrective actions to maintain a safe and inhabitable environment. MineARC’s new Aura-FX Digital Gas Monitoring System is a proprietary fixed gas monitoring unit, designed specifically for use in refuge chambers and safe havens.
Aura-FX is standard on all new MineARC Refuge Chambers and Safe Havens. It is also available to retrofit to most existing chambers during an upgrade or refurbishment.
A vast improvement on current digital gas monitors (DGMs) on the market, Aura-FX provides a more convenient solution to internal refuge gas monitoring. Aura-FX has the ability to individually monitor anywhere up to 11 gases via a series of user-friendly, digital screens.
Audible voice alarms will prompt occupants to replace scrubbing chemicals or adjust oxygen supply levels into the refuge chamber as required.
When utilised as part of the MineARC System Intelligence network, Aura-FX provides real-time gas monitoring data and analysis to the surface via the GuardIAN Remote Monitoring and Diagnostics System dashboard.
- Real-time gas monitoring with live analysis
- Triple gas monitoring as standard (with option to monitor up to 11 gases if required)
- Internal chamber monitoring (with option to test external atmosphere if required)
- Intuitive scrolling digital display shows gas level trends
- Audible alarm and voice prompts of management procedures
- Ethernet connectivity allows remote monitoring over the network
- Secure, anti-theft in-built design
- Reduced risk of human error
- Greater servicing efficiency and cheaper replacement parts compared to other digital gas monitors
| Gas | Sensor Life |
| Oxygen (O2) | 3 years |
| Carbon Monoxide (CO) | 1 year |
| Carbon Dioxide (CO2) | 3 years |
| Hydrogen Sulfide (H2S) | 1 year |
| Ammonia (NH2) | 1 year |
| Chlorine (Cl) | 1 year |
| Methane (CH4) | 3 years |
| Nitric Oxide (NO) | 1 year |
| Nitrogen Dioxide (NO2) | 1 year |
| Sulfer Dioxide (SO2) | 1 year |
In contrast to most other DGM’s on the market, Aura-FX sensors require a service and calibration just once every 12 months.
During a service, a trained technician will conduct a visual inspection of all hardware; verifying that it is operating correctly by adjusting the environment surrounding the sensors and ensuring that they respond appropriately.
Calibration is similar to other gas monitors on the market, with the added benefit of being able to calibrate insitu rather than bringing the unit to the surface. Each sensor is flooded with calibration gas of known composition, and the sensor reading is adjusted to match the target accordingly. This is conducted using the touchscreen interface on each monitor.
When the sensors reach the end of their service life, they are replaced simply by removing the click-in cover, pulling out the old sensor board, and pushing in the new one. MineARC encourage a bump test following any sensor change-over to ensure the unit is operating correctly.
Related Products
Reach-In Chambers
Reach-In Chambers When compared to other Reach-In Chambers (RICs) on the market, Biora leads the charge; with a ground-breaking control system that allows for intuitive programming and remote, web-based monitoring and management. Biora RICs also offer a large range of LED lighting options, unique to the research industry; including a selection of low intensity solutions